Wavebrite Slimline

How it works

Grey water passes through five main components in turn:

• A pre-filter and strainer removes solids to protect the pump
• A Whale Universal pump moves the water through the system
• A 5 micron filter removes sediment
• A 0.5 micron filter removes microplastics and fibres
• The Wavebrite Slimline module removes oils, grease, odours, phosphates and other chemicals

What it removes

• Microplastics and microfibres
• Cooking oil and grease
• Sun creams, shampoo and foams
• Soap and dishwasher soap
• Hair and suspended solids
• Phosphates and other chemicals

Where to install it

Fit it in the grey water line from your basins and showers, before the overboard discharge. If you connect it to a galley grey water source, we advise fitting a Wavebrite grease trap (1.75 or 4.5 litres), as grease can significantly reduce the life of the module. Ideally, galley waste water should go to the black water system because of the food waste it contains.

Suitable boat sizes

Wavebrite Slimline is designed for boats and yachts, 10m to 20m. Its module capacity is 20,000 litres, with options to expand. Boat sizes are a guide only, so please consult your dealer or Wave International.

Installation

The system comes complete with a Whale Universal water pump, brackets, hoses and clamps, and runs on 12 or 24V DC. Two pressure gauges and an hour meter, which is located in the panel, show when the filters need changing.

Replacement filters

Change filter cartridges 2 and 3 when the pre-filter pressure reaches 2 bar. The Wavebrite module should be replaced after 20,000 litres. Please contact your dealer or Wave International for replacement filter part numbers.