Flostream HiFlo10 Drinking Water Filters

Eliminate the use of plastic water bottles on board. Flostream HiFlo10 systems are compact, easy to install and provide premium quality, clean, safe drinking water, minimising reliance on single-use plastic bottles. Flostream also provides clean water for showers and hand basins on board. It is a chemical-free, practical, cost-effective and environmentally-friendly solution.

About this product

How it works

Water passes through the Flostream filter cartridge inside a compact housing with an integral bracket. The cartridge filters water down to 5 microns. Lime-scale and KDF inhibitors extend the life and increase the performance and efficiency of the filter media, and keep taps and sinks free of limescale.

What it removes

  • Chlorine
  • Lead
  • Microbial growth
  • Cysts, which can cause health problems
  • Unpleasant taste and odour

Health and lifestyle benefits

  • Removes contaminants for cleaner and safer hydration
  • Improves taste and odour
  • Avoids chemical leaching, such as BPA and phthalates from plastic bottles
  • Cyst reduction
  • WRAS certified components and filter media

Environmental benefits

  • Lowers your carbon footprint. Filtering water on board eliminates the emissions produced by transporting and producing plastic bottles.
  • Conserves resources. Making plastic bottles consumes petroleum and water resources.
  • Supports sustainability. A filtration system builds a sustainable habit that protects the marine ecosystem from the harm caused by discarded plastics.

Where to install it

Fit it in the water supply to your drinking tap, or to showers and hand basins. The housing has an integral bracket so it is easy to mount, for example under a counter.

Choosing a size

Flostream HiFlo10 comes in two sizes. The Micro HiFlo10 (169 × 130 mm) has a cartridge capacity of 3,000 litres. The HiFlo10 (337 × 146 mm) has a cartridge capacity of 6,000 litres. Both have a maximum recommended flow rate of 10 litres per minute.

Installation

Choose the version with a 3/4″ threaded BSP connector, or the 15 mm push fit version, which comes with a spanner. Each housing is supplied with its integral bracket and a cartridge.

Replacement filters

Order FLOMHF10C for the Micro HiFlo10 and FLOHF10C for the HiFlo10. How often you change a cartridge depends on the condition of the water and the volume filtered. Make cartridge changes part of a maintenance schedule, and change them at least every 6 months.

Product specifications

Specification Flostream Micro HiFlo10 Flostream HiFlo10
Flow rate 1.9 up to 10 litres per min 1.9 up to 10 litres per min
Max recommended flow rate 10 litres per min
Pressure range 0.7 to 8 bar 0.7 to 8.6 bar
Max temperature 45 °C 51.7 °C
Min temperature 4 °C 4 °C
Connections 3/4″ BSP or 15 mm
Dimensions 169 × 130 mm 337 × 146 mm
Weight TBC TBC
Voltage options Not applicable. No electrical supply required.
Part number FLOMHF10 Housing with integral bracket, 3/4″ threaded BSP connector and cartridge
FLOMHF10-15 Housing with integral bracket, 15 mm push fits, spanner and cartridge
FLOHF10BH Housing with integral bracket, 3/4″ threaded BSP connector and cartridge
FLOHF10-15BH Housing with integral bracket, 15 mm push fits, spanner and cartridge
Replacement cartridge FLOMHF10C Capacity 3,000 litres FLOHF10C Capacity 6,000 litres
Suitable vessel applications Drinking water, showers and hand basins on board
Cartridge replacement The time between replacements depends on the condition of the water and the volume filtered. Change cartridges at least every 6 months as part of a maintenance schedule.

Please contact Wave International for further technical information.

Where to Buy

Find a distributor by region