Wavebrite SMART

Confidently discharge your vessel’s waste water

Wavebrite SMART is designed for use on most types and sizes of vessel.

How it works

Waste water is filtered through the Wavebrite main module, a particulate filter and a 0.5 and a 5 micron filter. Discharged water is fully compliant with EU Waste Water Standards, and there is no need to use chemicals to remove odours.

What it removes

• Suspended solids
• Fats and grease
• Soap
• Sulphates

From hand basins, showers, washing machines and galleys on board.

The Pico display

A remotely mounted Pico display monitors and shows the flow rate, daily and total volumes, and the system conditions and status of the filters. To prevent non-compliant “dirty” water being pumped into the sea, an audible alarm is fitted to the display.

Where to install it

Easily installed for use with either a single basin or multiple sources, including galley waste. The unit is mounted on anti-vibration feet and housed in a sound proof box. To increase cartridge life, we recommend installing a Wavebrite Grease Trap (1.75L or 4.5L) when connecting to galley waste water.

Suitable vessels

Most types and sizes of vessel.

Installation

The system comes complete with the Pico display unit and cable, a Whale grey waste water sump (16L), Deutsche male plug, hose clips and 25 mm braided hose. The installation and operating manual is available online.

Replacement filters

The system processes up to 20,000 litres of waste water before the filters need changing. Replace cartridges 2 and 3 when the pre-filter pressure difference reaches 2 bar. Order wound cartridges WB004 (0.5 micron) and WB005 (5 micron), filter sleeve WB006 (100 micron) and the Wavebrite SMART module WBSLC1.